Best Garage Floor Contractors in West Des Moines, IA

Revival Concrete Coatings is one of West Des Moines, IA’s premier commercial flooring companies.

Are you looking for a reliable garage floor contractor to remodel your driveway, garage, or any other concrete floor in your home or business? At Revival Concrete Coatings, we provide alternatives with added benefits.

Our garage floor coatings offer increased durability, easy maintenance, and better aesthetics with your flooring. Whether you want to start a driveway project, an garage floor project, or any other residential or commercial coatings project, we will be happy to assist.

Call us today to learn more about our garage floor resurfacing service.

Our Flooring Solutions in West Des Moines, IA

At Revival Concrete Coatings, we provide a wide range of basement floor coatings solutions. We use UV-stable polyurea-polyaspartic coatings for interior and outdoor resurfacing projects. Whereas polyurea is a base coat, we top our surfaces with polyaspartic sealers for added strength.

Whether your renovation is large, small, or complex, our team can work on it and deliver showroom-quality finishes. We also work on large commercial and warehouse garage floor projects. Check out our product options and coatings services to learn more.

Patios are prone to wear and tear, splinters, cracks, and other signs of damage that occur over time. We provide custom patio coatings and finishes to improve the look and functional aspect of your concrete floors.

Garage floors handle large workloads in your home or business area. With our garage floor coatings, we can give your floors enhanced appeal and durability.

like any other outdoor area, pool decks are exposed to harsh weather elements such as water, heat from the sun, and traffic. Our pool deck coatings offer protection from UV-rays and moisture damage.

At Revival Concrete Coatings, we offer commercial coatings to enhance the safety of your workers and customers. With our premium commercial flooring alternatives, you get the most from your garage floors, driveways, or patios.

We provide high quality concrete coatings to protect your driveway from exposure to winds, the sun, and rain. With our custom finishing options, your floor remains in a good condition and your home or business stands out.

We provide versatile concrete coatings suitable for all kinds of surfaces. Your walkway, sidewalk, or any other concrete surface in your home or business can benefit from this service.

We install stylish and practical concrete floor coatings with chip sealers. Available in multiple patterns and colors, we broadcast chips on your flooring surface before applying the topcoat.

We install polyaspartic garage floor coatings with more benefits than epoxy coatings. Our alternative to epoxy floors provides increased durability and aesthetics. This applies to all our garage floor or patio coatings.

Why Choose Revival Concrete Coatings in West Des Moines, IA

Our contractors make the best team for residential and commercial coatings. We offer:

  • Transparent estimates
  • 50-year warranties
  • UV-stable coatings for protection from rain and the sun
  • One-day services
  • Custom color and pattern options
  • Stronger products than epoxy coatings
  • Access to high-tech technology and equipment

Our Better-than-Epoxy Garage Floor Resurfacing Process

At Revival Concrete Coatings, we adopt a detailed process of floor coatings application for hassle-free and optimal results. Here is our comprehensive step-by-step process:

We do shot blasting and diamond grinding to even out your epoxy flooring before applying the basecoat and topcoat. Our team also vacuums your floor to remove loose flakes and minimize dust.

We then apply our polyurea basecoat for enhanced durability and better aesthetic benefits than epoxy garage floor coatings.

We add chips on your flooring to customize texture and color, giving you more control over the look of your garage floor.

Our contractors remove loose flakes and other forms of imperfections visible on your concrete floor. We give it a beautiful and smooth finish. Vacuuming the floor also helps remove any loose particles.

Finally, we complete the process with a polyaspartic clear topcoat application. The final coat offers increased durability and UV-protection.

Where We Service

Along with West Des Moines, IA we serve in thee following regions;

  • Ankeny, IA
  • Des Moines, IA
  • Norwalk, IA
  • Waukee, IA



If your region is not in the above mentioned locations, reach us out and we will look into it.

Local Garage Floor Coatings in West Des Moines

At Revival Concrete Coatings, we service homes and businesses, including warehouses and commercial spaces in West Des Moines and surrounding areas.

We understand the local climatic conditions and thus provide solutions that can withstand the weather in West Des Moines.

With our epoxy floor coating alternatives, homeowners and businesses get floors they can use for many years. We love what we do and offer the best garage coatings service. Customers love to associate with businesses that take time to work on their physical appearance.

Our commercial coatings help businesses create a good first impression, attracting new customers. You can also choose coatings that reflect your personality to create indoor or outdoor spaces that impress.

We are dedicated to delivering all your expectations for long-lasting floors with beautiful finishes.  Wherever you are in West Des Moines, you only have to give us a call. Let our professionals revamp your garage floor with durable coatings.


Get Your Free Quote

"*" indicates required fields

Call Us Today for a Free Estimate!

The best concrete garage floors are dressed in attractive, long-lasting polyaspartic coatings. At Revival Concrete Coatings, we offer high quality surface coatings for both commercial and residential customers in West Des Moines.

Unlike standard epoxy floor coatings, our versatile solutions work for all spaces, ranging from driveways to patios to pool decks.

Call us today at (515) 850-7192 for more information about our premium flooring coating alternatives.


Our polyurea floor coatings are a concrete resurfacing option that is installed over existing concrete floors for both interior and exterior concrete. All of our coatings are installed by hand, thus giving our clients a true, one-of-a-kind floor. We install a wide range of flooring systems such as: solid color, flake, and grind and clear floors.

Clients have the ability to customize any coating with our various color options and design techniques. Concrete coatings are used not only in residential, but industrial and recreational settings as well. Revival Concrete Coatings uses only the highest quality, industrial products on the market to ensure every customer is getting the best value.

Each project is customized to your particular concrete flooring needs. Every job we do is different, because we offer different types of coatings and finishes.  We will work with you to develop a free estimate keeping your budget in mind. 

If using 100% solid polyurea, your floor will be cured and walkable in 12 hours. You can return to full heavy traffic after 24-36 hours depending on the temperature the floor was installed in.

We start every project by first preparing the concrete for our products. It is imperative that we have a fresh concrete surface before installing our concrete coatings on your project – this will allow our products to have only the BEST mechanical bond.

We spend approximately 33% of the project prepping your floor by diamond grinding with our 800 lb Lavina Grinder! Most contractors will come in and just acid wash or not even prep your floor – we get calls all the time about botched installs with customers asking if we can save their project; we must start fresh every time.

If you follow our maintenance and cleaning guidelines, you should not have to worry about resealing the concrete floor coating. 

No worries, we are experts in repairing existing problem areas of concrete. In some cases we have been found to be a cheaper alternative over tearing out and replacing existing slabs of concrete. Once we have saved your concrete we then install our decorative designs to hide the flaws and repairs.

Sweeping takes care of most messes. If there is mud or chemicals you can mop them with any household soap and warm water. Dawn or SimpleGreen work great! If chemicals are spilled on the floor, wipe them up as soon as you notice them.

Floor coatings are extremely resistant to most hazards, including cleaners, gas, oil, transmission fluid, and even most industrial chemicals. Although our coatings are chemical resistant, you will still need to wipe up any chemical spills as soon as you notice them.

Polyurea is useful for concrete floors, as it quickly and strongly bonds to concrete while providing a smooth, virtually impermeable surface that protects the floor from impact, water damage, chemicals, heat, and sunlight.

Residential floors come with a 15 year warranty and commercial floors have a 5 year warranty.

Each project is customized to your particular concrete flooring needs. Every job we do is different, because we offer different types of coatings and finishes. We will work with you to develop a free estimate keeping your budget in mind.
We use the highest quality materials in our polyaspartic floor coatings and we’ve perfected our application process to make the concrete coating permanent. Once completely cured and adhered, the concrete coating is meant to last as long as the substrate it’s adhered to.
Polyaspartic Floor Coatings dry more quickly than Epoxy Floor Coatings, and the finish is also more durable. Our floor concrete coating finishes are also more slip-resistant and will not discolor like some Epoxy Floor Coatings.
Our flooring cures within a few hours, however our team of professionals recommends waiting at least 4-6 hours before walking on your brand new concrete coated flooring. After 12 hours, you can begin moving lightweight objects onto the flooring, like light patio furniture. We recommend waiting a full 24 hours before moving anything heavy back into the area where we’ve applied the coating (your car, heavy equipment or furniture etc.).
It sure won’t! Our concrete floor coverings will not yellow or discolor, because they are UV stable. This one of the many benefits of using Polyurea or Polyaspartic floor coatings.
If you follow our maintenance and cleaning guidelines, you should not have to worry about resealing the concrete floor coating. We offer a professional grade cleaner that will easily remove stains or tire marks, but will also preserve the life of your concrete coating topcoat.
We’ve perfected our 6-step application process, so most typical projects take between 5-10 hours depending on the square footage. We pride ourselves in a one-day application, and will do everything possible to stay within that time frame. Rainy weather can delay the project, but it is rare.
You can clean our concrete coatings with typical sweeping, mopping or steaming, and hoses. We offer maintenance services should your concrete flooring ever need cleaning, however you can also use non-abrasive cleaners, like CLR, to remove grease or other stains.
TAGG’s concrete coatings are oil resistant as well as moisture resistant.
Bayer Material Science first developed Polyaspartic coatings in the 1990’s to protect steel bridges and infrastructure from rusting and corrosion. It has since been modified for different applications, once being durable concrete flooring coatings.
Polyaspartic Concrete coating is another name for Aliphatic Polyurea, which is a hybrid material consisting of ester and other materials. It was originally developed to coat metal bridges. It was later used to coat concrete flooring due to its durability and moisture resistance. Polyurea is also used to coat truck bed liners.
They sure can! We offer wonderful solutions for driveways, patios, and even the area around the pool. Our coatings are all UV stable, which will help prevent discoloration or flaking.
Polyaspartic flooring coatings can be used in a variety of environments. The durability, slip resistant finish is fantastic for any industrial setting, storefronts, patios, or even driveways or garages.
We have perfected a six step process for applying Polyaspartic Floor Coatings that involves prepping the floor, basecoating, applying chips, scraping the chips, and applying the clear UV protective clear coat.
You can! Polyaspartic floor coatings are safe to apply in temperatures as cold as -40 degrees.
Our Polyaspartic Floor Coatings are engineered to rapidly cure, and can be dry in a matter of a few hours! However, we recommend waiting at least 5-6 hours before walking on newly applied coating and 24 hours before moving heavy objects back onto the flooring.
Installing Polyaspartic Floor Coating correctly is critical to the appearance and durability of your flooring. Hiring a professional is the best way to ensure that your flooring will look amazing and last a lifetime! Our team at TAGG Concrete Coatings is certified in Polyaspartic Floor Coating installation and have many years of experience.
It is! Polyaspartic floor coatings are specially formulated for their incredible adhesion properties. If you have existing patches of epoxy coating, our team can sand it down, vacuum, and wipe down the area with a solvent. Once prepped, we will apply your new, superior, Polyaspartic Floor Coating

Our clients are our most important asset.

This is what they say about us.

Where We serve
We service the Greater Des Moines And the Omaha Metropolitan area including:

Revival Concrete Coatings

EVERY job is done right and our customers are 100% Satisfied.

6950 NE 14th Street, Suite 31 Ankeny IA 5002