Flooring Services in Altoona, IA

Revival Concrete Coatings is one of Nebraska’s premier commercial flooring companies.

What is a concrete floor coating?

Concrete floor coatings are a layer of sealant that can be applied to concrete floors to provide a high-gloss shine and protecting the concrete beneath.

At Revival Concrete Coatings, we apply a topcoat of polyaspartic coating to every floor job. Polyaspartic coating is stronger and more durable than epoxy, strengthening the floors once cured. Polyaspartic topcoats reinforce and provides a top layer four times more durable than traditional epoxy flooring. Many professionals prefer polyaspartic topcoats over traditional epoxy floors for their high durability, faster cure times, and UV resistance.

Why Professionals Recommend Polyaspartic Top Coats

Flooring professionals recommend polyaspartic top coats because they increase the durability of the finished floors when compared to epoxy alone. There are many benefits to installing a polyaspartic topcoat, making it a preferred choice for most flooring projects.

Highly Durable

Polyaspartic coatings are highly durable, four times more durable than traditional epoxy flooring. Polyaspartic topcoats are scratch, stain, and chemical resistant. Protect your floors and prevent further damage by installing a polyaspartic protective coating.

Easy to Clean

Polyaspartic floors are non-porous, making them easy to keep clean and maintain. Polyaspartic coated floors only require sweeping and occasional mopping to maintain their appearance. Because of their non-porous nature, polyaspartic floors are moisture-resistant and a variety of chemical cleaners can be used on them without damage if necessary.

Faster Curing

Traditional epoxy floors can take over a week to cure, and exact cure times are weather-dependent. Polyaspartic coatings cure quickly regardless of the temperature and can be walked on the same day or day after installation. Installation only takes a few hours, and curing takes 24 hours or less. You won’t have to wait to use your garage with a polyaspartic topcoat installation.

Low to No VOCs

The release of VOCs, or volatile organic compounds, is a concern some homeowners have when it comes to floor coatings. These compounds are released as fumes from certain chemicals. The good news is that polyaspartic coatings have low to no VOCs, making them a safe option for both humans and pets.

100% UV Resistant

Polyaspartic coatings are 100% UV resistant, meaning they will not yellow or fade with sun exposure. Floors with a polyaspartic topcoat will look just as bright and vibrant as the day they were installed for years to come.


Polyaspartic floor coatings are fully customizable, coming in many colors and textures. Options can include solid colors, textures, patterns, and even metallics and glitter. Create any look you can imagine in your garage with polyaspartic floor coatings.

Where We Service

At Revival Concrete Coatings, we take pride in serving Altoona and the surrounding areas, including:

  • Ankeny, IA
  • Des Moines, IA
  • Grimes, IA
  • Norwalk, IA
  • Urbandale, IA
  • Waukee, IA
  • West Des Moines, IA
  • Ames, IA
  • Indianola, IA
  • Adele, IA


Garage Floor Coating Services in Altoona.

Your garage floors take a beating. Between heavy cars, foot traffic, and home projects, your garage’s concrete can wear down. Floor coatings can offer a protective layer that revitalizes your garage and prolongs the lifespan of your concrete. Give your garage the treatment it deserves by installing a protective concrete coating that includes polyurea as base coat and polyaspartic as a top coat.

Get Your Free Quote

"*" indicates required fields

Trust an Expert

If you are considering installing an polyaspartic floor coating, you need an expert you can trust. Revival Concrete Coatings offers garage floor resurfacing services to make your old, cracked floors look like new. With our process, you can get a fresh, clean appearance for your garage floor with minimal expense and downtime. We offer the best warranties in the industry, so if anything happens to your floor, we will come out and fix it. Contact us today for a free quote and see what our experts can do for you.


Our polyurea floor coatings are a concrete resurfacing option that is installed over existing concrete floors for both interior and exterior concrete. All of our coatings are installed by hand, thus giving our clients a true, one-of-a-kind floor. We install a wide range of flooring systems such as: solid color, flake, and grind and clear floors.

Clients have the ability to customize any coating with our various color options and design techniques. Concrete coatings are used not only in residential, but industrial and recreational settings as well. Revival Concrete Coatings uses only the highest quality, industrial products on the market to ensure every customer is getting the best value.

Each project is customized to your particular concrete flooring needs. Every job we do is different, because we offer different types of coatings and finishes.  We will work with you to develop a free estimate keeping your budget in mind. 

If using 100% solid polyurea, your floor will be cured and walkable in 12 hours. You can return to full heavy traffic after 24-36 hours depending on the temperature the floor was installed in.

We start every project by first preparing the concrete for our products. It is imperative that we have a fresh concrete surface before installing our concrete coatings on your project – this will allow our products to have only the BEST mechanical bond.

We spend approximately 33% of the project prepping your floor by diamond grinding with our 800 lb Lavina Grinder! Most contractors will come in and just acid wash or not even prep your floor – we get calls all the time about botched installs with customers asking if we can save their project; we must start fresh every time.

If you follow our maintenance and cleaning guidelines, you should not have to worry about resealing the concrete floor coating. 

No worries, we are experts in repairing existing problem areas of concrete. In some cases we have been found to be a cheaper alternative over tearing out and replacing existing slabs of concrete. Once we have saved your concrete we then install our decorative designs to hide the flaws and repairs.

Sweeping takes care of most messes. If there is mud or chemicals you can mop them with any household soap and warm water. Dawn or SimpleGreen work great! If chemicals are spilled on the floor, wipe them up as soon as you notice them.

Floor coatings are extremely resistant to most hazards, including cleaners, gas, oil, transmission fluid, and even most industrial chemicals. Although our coatings are chemical resistant, you will still need to wipe up any chemical spills as soon as you notice them.

Polyurea is useful for concrete floors, as it quickly and strongly bonds to concrete while providing a smooth, virtually impermeable surface that protects the floor from impact, water damage, chemicals, heat, and sunlight.

Residential floors come with a 15 year warranty and commercial floors have a 5 year warranty.

Each project is customized to your particular concrete flooring needs. Every job we do is different, because we offer different types of coatings and finishes. We will work with you to develop a free estimate keeping your budget in mind.
We use the highest quality materials in our polyaspartic floor coatings and we’ve perfected our application process to make the concrete coating permanent. Once completely cured and adhered, the concrete coating is meant to last as long as the substrate it’s adhered to.
Polyaspartic Floor Coatings dry more quickly than Epoxy Floor Coatings, and the finish is also more durable. Our floor concrete coating finishes are also more slip-resistant and will not discolor like some Epoxy Floor Coatings.
Our flooring cures within a few hours, however our team of professionals recommends waiting at least 4-6 hours before walking on your brand new concrete coated flooring. After 12 hours, you can begin moving lightweight objects onto the flooring, like light patio furniture. We recommend waiting a full 24 hours before moving anything heavy back into the area where we’ve applied the coating (your car, heavy equipment or furniture etc.).
It sure won’t! Our concrete floor coverings will not yellow or discolor, because they are UV stable. This one of the many benefits of using Polyurea or Polyaspartic floor coatings.
If you follow our maintenance and cleaning guidelines, you should not have to worry about resealing the concrete floor coating. We offer a professional grade cleaner that will easily remove stains or tire marks, but will also preserve the life of your concrete coating topcoat.
We’ve perfected our 6-step application process, so most typical projects take between 5-10 hours depending on the square footage. We pride ourselves in a one-day application, and will do everything possible to stay within that time frame. Rainy weather can delay the project, but it is rare.
You can clean our concrete coatings with typical sweeping, mopping or steaming, and hoses. We offer maintenance services should your concrete flooring ever need cleaning, however you can also use non-abrasive cleaners, like CLR, to remove grease or other stains.
TAGG’s concrete coatings are oil resistant as well as moisture resistant.
Bayer Material Science first developed Polyaspartic coatings in the 1990’s to protect steel bridges and infrastructure from rusting and corrosion. It has since been modified for different applications, once being durable concrete flooring coatings.
Polyaspartic Concrete coating is another name for Aliphatic Polyurea, which is a hybrid material consisting of ester and other materials. It was originally developed to coat metal bridges. It was later used to coat concrete flooring due to its durability and moisture resistance. Polyurea is also used to coat truck bed liners.
They sure can! We offer wonderful solutions for driveways, patios, and even the area around the pool. Our coatings are all UV stable, which will help prevent discoloration or flaking.
Polyaspartic flooring coatings can be used in a variety of environments. The durability, slip resistant finish is fantastic for any industrial setting, storefronts, patios, or even driveways or garages.
We have perfected a six step process for applying Polyaspartic Floor Coatings that involves prepping the floor, basecoating, applying chips, scraping the chips, and applying the clear UV protective clear coat.
You can! Polyaspartic floor coatings are safe to apply in temperatures as cold as -40 degrees.
Our Polyaspartic Floor Coatings are engineered to rapidly cure, and can be dry in a matter of a few hours! However, we recommend waiting at least 5-6 hours before walking on newly applied coating and 24 hours before moving heavy objects back onto the flooring.
Installing Polyaspartic Floor Coating correctly is critical to the appearance and durability of your flooring. Hiring a professional is the best way to ensure that your flooring will look amazing and last a lifetime! Our team at TAGG Concrete Coatings is certified in Polyaspartic Floor Coating installation and have many years of experience.
It is! Polyaspartic floor coatings are specially formulated for their incredible adhesion properties. If you have existing patches of epoxy coating, our team can sand it down, vacuum, and wipe down the area with a solvent. Once prepped, we will apply your new, superior, Polyaspartic Floor Coating

Our clients are our most important asset.

This is what they say about us.

Where We serve
We service the Greater Des Moines And the Omaha Metropolitan area including:

Revival Concrete Coatings

EVERY job is done right and our customers are 100% Satisfied.

6950 NE 14th Street, Suite 31 Ankeny IA 5002