Best Pool Deck Coating Service in West Des Moines, IA

Revival Concrete Coatings provides beautiful and durable pool deck coatings in Greater Des Moines and Eastern Iowa.

Revival Concrete Coatings is Greater Des Moines and Eastern Iowa’s number one choice for premium pool deck coatings.

We can transform even the most run-down and cracked pool decks and turn them into the highlight of your backyard oasis. Our polyurea and polyaspartic pool deck coatings are as beautiful as they are durable, ensuring your pool deck stays protected from anything mother nature throws its way. If you want to keep your pool deck in prime condition, trust our top of the line coating system and give us a call today to set up your free quote.

Is your pool deck looking drab and outdated? Do you want to protect your pool deck from environmental hazards while boosting its visual appeal? If so, Revival Concrete Coatings can help.

Better Than Epoxy Pool Deck Coatings

We use a polyurea base coat and a polyaspartic top coat to ensure your pool deck can withstand any environmental hazard it comes across. These coatings are 98% more flexible than epoxy and four times stronger. They are also UV-resistant, so you won’t have to worry about yellowing or fading over time. Unlike epoxy floor coatings, polyurea and polyaspartic coatings don’t blister or peel, keeping your pool deck looking better than ever for years to come. 

Unmatched Pool Deck Protection Without Sacrificing Style

At Revival Concrete Coatings, we understand that style is just as important as pool deck protection. We offer a variety of stylish decorative flakes that will take your pool deck to new heights. There are multiple color schemes and designs to choose from, allowing you to customize your pool deck to your unique style.

If you can’t find a design or color that matches your style, we will create a custom color option that matches your specific taste. Our team will go above and beyond to ensure you receive a beautiful pool deck you can take pride in for years to come. At Revival Concrete Coatings, your satisfaction is always our top priority.  

Benefits of Pool Deck Resurfacing

Getting a pool deck coating with Revival Concrete Coatings provides a wide range of benefits. Not only does it remove any unsightly stains, cracks, nicks, and scuffs, but it corrects an array of preexisting issues as well, including:

Quick Installation Using Expert Techniques

Our concrete coating specialists work diligently to install your floor so you can enjoy it. We use an effective six-step process to ensure our customers receive a high-quality deck coating as efficiently as possible. Our process is as follows.

Step 1: Prep the Area

We start our process by using top-of-the-line diamond grinders.

Step 2: Fix the Area

Once the area is smooth, we clear out the excess debris and remove any stains. We also fill in cracks and dents to ensure quality and stability.

Step 3: Apply the Base Coat

After that, we apply the deck’s base coating to establish a robust foundation.

Step 4: Add Decorative Chips

We then add your desired decorative chips to the deck’s base coat to heighten its visual appeal.

Step 5: Clean the Area

Once the base coat cures, we remove any excess flakes and debris.

Step 6: Apply the Top Layer

Finally, we apply a sturdy polyaspartic coating to protect your pool deck from extreme weather conditions, physical damages, UV rays, and more.

Our team only uses industry-leading tools and materials to install your pool deck. We never use off-brand supplies, ensuring you receive a first-class concrete pool deck coating that will last you years. We are happy to answer any questions about our installation process and provide expert maintenance tips to help you keep your new pool deck in prime condition.

Where We Service

We proudly service all of West Des Moines, IA and other surrounding areas, including:

  • Ankeny, IA
  • Waukee, IA
  • Ames, IA
  • Des Moines, IA
  • Norwalk, IA
  • Cedar Rapids, IA
  • Iowa City, IA

 

 

If you don’t see your city on our list but live in Iowa, give us a call anyway. We might be able to assist you with your next flooring project!

OUR SERVICES

Get Your Free Quote

"*" indicates required fields

Why Choose Revival Concrete Coatings?

Revival Concrete Coatings is one of the most trusted and dependable pool deck coating companies in the Greater Des Moines and Eastern Iowa area. We are completely transparent and keep you informed during the entire installation process. We only hire fully trained craftsmen that always have your best interest in mind.

At Revival Concrete Coatings, we strive to give your pool deck the best protection while providing an outstanding customer service experience to you and your family. We are always happy to answer any questions you may have before, during or after installation.

Get the best pool deck coatings in Greater Des Moines and Eastern Iowa, by contacting Revival Concrete Coatings—call us at (515) 850-7192 and get the pool deck coating of your dreams today!

OUR FREQUENTLY
ASKED QUESTIONS

Our polyurea floor coatings are a concrete resurfacing option that is installed over existing concrete floors for both interior and exterior concrete. All of our coatings are installed by hand, thus giving our clients a true, one-of-a-kind floor. We install a wide range of flooring systems such as: solid color, flake, and grind and clear floors.

Clients have the ability to customize any coating with our various color options and design techniques. Concrete coatings are used not only in residential, but industrial and recreational settings as well. Revival Concrete Coatings uses only the highest quality, industrial products on the market to ensure every customer is getting the best value.

Each project is customized to your particular concrete flooring needs. Every job we do is different, because we offer different types of coatings and finishes.  We will work with you to develop a free estimate keeping your budget in mind. 

If using 100% solid polyurea, your floor will be cured and walkable in 12 hours. You can return to full heavy traffic after 24-36 hours depending on the temperature the floor was installed in.

We start every project by first preparing the concrete for our products. It is imperative that we have a fresh concrete surface before installing our concrete coatings on your project – this will allow our products to have only the BEST mechanical bond.

We spend approximately 33% of the project prepping your floor by diamond grinding with our 800 lb Lavina Grinder! Most contractors will come in and just acid wash or not even prep your floor – we get calls all the time about botched installs with customers asking if we can save their project; we must start fresh every time.

If you follow our maintenance and cleaning guidelines, you should not have to worry about resealing the concrete floor coating. 

No worries, we are experts in repairing existing problem areas of concrete. In some cases we have been found to be a cheaper alternative over tearing out and replacing existing slabs of concrete. Once we have saved your concrete we then install our decorative designs to hide the flaws and repairs.

Sweeping takes care of most messes. If there is mud or chemicals you can mop them with any household soap and warm water. Dawn or SimpleGreen work great! If chemicals are spilled on the floor, wipe them up as soon as you notice them.

Floor coatings are extremely resistant to most hazards, including cleaners, gas, oil, transmission fluid, and even most industrial chemicals. Although our coatings are chemical resistant, you will still need to wipe up any chemical spills as soon as you notice them.

Polyurea is useful for concrete floors, as it quickly and strongly bonds to concrete while providing a smooth, virtually impermeable surface that protects the floor from impact, water damage, chemicals, heat, and sunlight.

Residential floors come with a 15 year warranty and commercial floors have a 5 year warranty.

Each project is customized to your particular concrete flooring needs. Every job we do is different, because we offer different types of coatings and finishes. We will work with you to develop a free estimate keeping your budget in mind.
We use the highest quality materials in our polyaspartic floor coatings and we’ve perfected our application process to make the concrete coating permanent. Once completely cured and adhered, the concrete coating is meant to last as long as the substrate it’s adhered to.
Polyaspartic Floor Coatings dry more quickly than Epoxy Floor Coatings, and the finish is also more durable. Our floor concrete coating finishes are also more slip-resistant and will not discolor like some Epoxy Floor Coatings.
Our flooring cures within a few hours, however our team of professionals recommends waiting at least 4-6 hours before walking on your brand new concrete coated flooring. After 12 hours, you can begin moving lightweight objects onto the flooring, like light patio furniture. We recommend waiting a full 24 hours before moving anything heavy back into the area where we’ve applied the coating (your car, heavy equipment or furniture etc.).
It sure won’t! Our concrete floor coverings will not yellow or discolor, because they are UV stable. This one of the many benefits of using Polyurea or Polyaspartic floor coatings.
If you follow our maintenance and cleaning guidelines, you should not have to worry about resealing the concrete floor coating. We offer a professional grade cleaner that will easily remove stains or tire marks, but will also preserve the life of your concrete coating topcoat.
We’ve perfected our 6-step application process, so most typical projects take between 5-10 hours depending on the square footage. We pride ourselves in a one-day application, and will do everything possible to stay within that time frame. Rainy weather can delay the project, but it is rare.
You can clean our concrete coatings with typical sweeping, mopping or steaming, and hoses. We offer maintenance services should your concrete flooring ever need cleaning, however you can also use non-abrasive cleaners, like CLR, to remove grease or other stains.
TAGG’s concrete coatings are oil resistant as well as moisture resistant.
Bayer Material Science first developed Polyaspartic coatings in the 1990’s to protect steel bridges and infrastructure from rusting and corrosion. It has since been modified for different applications, once being durable concrete flooring coatings.
Polyaspartic Concrete coating is another name for Aliphatic Polyurea, which is a hybrid material consisting of ester and other materials. It was originally developed to coat metal bridges. It was later used to coat concrete flooring due to its durability and moisture resistance. Polyurea is also used to coat truck bed liners.
They sure can! We offer wonderful solutions for driveways, patios, and even the area around the pool. Our coatings are all UV stable, which will help prevent discoloration or flaking.
Polyaspartic flooring coatings can be used in a variety of environments. The durability, slip resistant finish is fantastic for any industrial setting, storefronts, patios, or even driveways or garages.
We have perfected a six step process for applying Polyaspartic Floor Coatings that involves prepping the floor, basecoating, applying chips, scraping the chips, and applying the clear UV protective clear coat.
You can! Polyaspartic floor coatings are safe to apply in temperatures as cold as -40 degrees.
Our Polyaspartic Floor Coatings are engineered to rapidly cure, and can be dry in a matter of a few hours! However, we recommend waiting at least 5-6 hours before walking on newly applied coating and 24 hours before moving heavy objects back onto the flooring.
Installing Polyaspartic Floor Coating correctly is critical to the appearance and durability of your flooring. Hiring a professional is the best way to ensure that your flooring will look amazing and last a lifetime! Our team at TAGG Concrete Coatings is certified in Polyaspartic Floor Coating installation and have many years of experience.
It is! Polyaspartic floor coatings are specially formulated for their incredible adhesion properties. If you have existing patches of epoxy coating, our team can sand it down, vacuum, and wipe down the area with a solvent. Once prepped, we will apply your new, superior, Polyaspartic Floor Coating

Our clients are our most important asset.

This is what they say about us.

Where We serve
We service the Greater Des Moines And the Omaha Metropolitan area including:

Revival Concrete Coatings

EVERY job is done right and our customers are 100% Satisfied.

6950 NE 14th Street, Suite 31 Ankeny IA 5002