Best Garage Floor Contractors in Waukee, IA

Revival Concrete Coatings is one of West Des Moines, IA’s premier commercial flooring companies.

Waukee, IA, Garage Floor Coatings Services

Does your garage floor suffer from chips and cracks? Do you find it impossible to remove its unsightly stains? At Revival Concrete Coatings, we provide an epoxy garage floor alternative that will revitalize the appearance of your tired, worn surfaces and protect their integrity for years to come.

Reach out to us at (515) 850-7192 for a free, no-obligation consultation.

At Revival Concrete Coatings, we offer versatile concrete coating solutions that work well for many residential and commercial flooring applications in Waukee, including the options below.

Whether it’s dropping tools, storing heavy equipment, or spilling corrosive fluids, garage floors tend to take a lot of abuse. Instead of getting an epoxy garage floor that doesn’t offer much protection, you can invest in a polyurea and polyaspartic garage coating that can last a lifetime with proper maintenance.

Another space that many property owners tend to neglect is the basement. Unlike your typical epoxy, our concrete coatings for basement floors will safeguard your surfaces from water damage and physical wear while giving them a pristine, blemish-free look.

Are you tired of your slippery, searing hot concrete pool deck? With our pool-deck coating solutions, you can enjoy a surface that doesn’t retain heat and helps prevent nasty slips and falls.

The products we use are also waterproof and chemical-resistant, making it the perfect choice for pool areas. It protects your concrete from constant moisture exposure and harsh pool solvents.

Create the ultimate outdoor entertainment area with our premier patio coatings. We offer many color combinations, flake designs, and granule options to suit your outdoor aesthetic perfectly.

Our offerings also provide superior durability and strength while making it easier to clean up after entertaining your friends and family.

Improve the visual appeal of your driveway with our seamless coatings. Your new outdoor surface won’t just look the part, but it will also protect the concrete underneath from ongoing wear and tear.

Unlike paint or epoxy, a polyaspartic coating is resistant to hot tire pickup, making it excellent if you want superior strength, high performance, and a premier finish surface.

Don’t settle for a typical commercial floor coating that will only last you a few years. Our offerings won’t just last you a long time, but they can also improve the safety and efficiency of your work environment. They are effortless to clean, slip-resistant, and unaffected by various forms of wear and tear.

Why Choose Revival Concrete Coatings?

At Revival Concrete Coatings, we understand the importance of having stylish and durable floors. Hundreds of property owners in Waukee trust us with their flooring projects because we provide:

  • Reliable customer service: Our team practices open and honest communication with all of our clients. We work hard to be always available to answer all of your questions, provide project updates, and solve every concern promptly.
  • Free consultations: Choosing the right floor can be challenging, but we’re here to guide you every step of the way. We offer our professional insight and recommend the best options that fit your needs.
  • Experienced technicians: Our team has the skills and experience to maintain the highest quality even under pressing deadlines.
  • Quality materials: We only use the best materials in the industry to produce results that exceed your expectations. That’s why we don’t offer obsolete epoxy flooring.

Whether you’re looking for an epoxy garage floor alternative or a new driveway surface, we’re the team for the job. Reach out to our experts today so we can begin discussing your new project!

Learn How We Upgrade Your Concrete Floors

We at Revival Concrete Coatings guarantee a perfect installation every time by following our tried and tested process below.

first thing we do is to prepare the surface. After creating a smooth, blemish-free floor, we clean it to remove any dust and debris.

With the floor fully prepped, we begin applying the first coat. We use a polyurea base because of its many advantages, including:

  • Bonds effectively on concrete, cement, and many other surfaces
  • Stable under various weather and environmental conditions
  • Resistant to extreme temperatures
  • Resistant to physical damage
  • Coating thickness is highly controllable
  • Cures quickly

next layer is optional for added color and texture. We spray the floor with the vinyl chip design of your choosing and scrape off the excess to ensure everything is smooth. If you prefer coated concrete’s clean, simple look, we can skip this step and seal the floor with the final layer.

final layer we apply is a clear polyaspartic product. The main advantage of this coat vs. your average epoxy flooring is its UV resistance, making it a solid choice for outdoor surfaces. In most cases, you can start enjoying your newly finished floor the next day, thanks to its rapid curing time.

If you want to know more about our coating process, please give our experts a call. We are more than happy to answer your questions and concerns!

Where We Service

If you’re in or around Waukee, IA, and are thinking about upgrading your bare concrete surfaces, we at Revival Concrete Coatings are your trusted specialists. We proudly service all of Waukee and other surrounding areas, including:

  • Ankeny, IA
  • Des Moines, IA
  • Norwalk, IA
  • West Des Moines, IA



If you don’t see your city on our list but live in Iowa, give us a call anyway. We might be able to assist you with your next flooring project!


Get Your Free Quote

"*" indicates required fields

Call Us Today for a Free Quote!

Our team at Revival Concrete Coatings stands behind the quality and longevity of our materials and craftsmanship. Whether you need a garage floor resurfacing or a protective coating for brand new concrete, our experts in Waukee are ready to serve. Call us at (515) 850-7192 and get a free, no-obligation estimate today!

Give your commercial floor the protection it deserves.

Call us at (515) 850-7192 and schedule your appointment with Revival Concrete Coatings to see what our team of floor coating experts can do for you.


Our polyurea floor coatings are a concrete resurfacing option that is installed over existing concrete floors for both interior and exterior concrete. All of our coatings are installed by hand, thus giving our clients a true, one-of-a-kind floor. We install a wide range of flooring systems such as: solid color, flake, and grind and clear floors.

Clients have the ability to customize any coating with our various color options and design techniques. Concrete coatings are used not only in residential, but industrial and recreational settings as well. Revival Concrete Coatings uses only the highest quality, industrial products on the market to ensure every customer is getting the best value.

Each project is customized to your particular concrete flooring needs. Every job we do is different, because we offer different types of coatings and finishes.  We will work with you to develop a free estimate keeping your budget in mind. 

If using 100% solid polyurea, your floor will be cured and walkable in 12 hours. You can return to full heavy traffic after 24-36 hours depending on the temperature the floor was installed in.

We start every project by first preparing the concrete for our products. It is imperative that we have a fresh concrete surface before installing our concrete coatings on your project – this will allow our products to have only the BEST mechanical bond.

We spend approximately 33% of the project prepping your floor by diamond grinding with our 800 lb Lavina Grinder! Most contractors will come in and just acid wash or not even prep your floor – we get calls all the time about botched installs with customers asking if we can save their project; we must start fresh every time.

If you follow our maintenance and cleaning guidelines, you should not have to worry about resealing the concrete floor coating. 

No worries, we are experts in repairing existing problem areas of concrete. In some cases we have been found to be a cheaper alternative over tearing out and replacing existing slabs of concrete. Once we have saved your concrete we then install our decorative designs to hide the flaws and repairs.

Sweeping takes care of most messes. If there is mud or chemicals you can mop them with any household soap and warm water. Dawn or SimpleGreen work great! If chemicals are spilled on the floor, wipe them up as soon as you notice them.

Floor coatings are extremely resistant to most hazards, including cleaners, gas, oil, transmission fluid, and even most industrial chemicals. Although our coatings are chemical resistant, you will still need to wipe up any chemical spills as soon as you notice them.

Polyurea is useful for concrete floors, as it quickly and strongly bonds to concrete while providing a smooth, virtually impermeable surface that protects the floor from impact, water damage, chemicals, heat, and sunlight.

Residential floors come with a 15 year warranty and commercial floors have a 5 year warranty.

Each project is customized to your particular concrete flooring needs. Every job we do is different, because we offer different types of coatings and finishes. We will work with you to develop a free estimate keeping your budget in mind.
We use the highest quality materials in our polyaspartic floor coatings and we’ve perfected our application process to make the concrete coating permanent. Once completely cured and adhered, the concrete coating is meant to last as long as the substrate it’s adhered to.
Polyaspartic Floor Coatings dry more quickly than Epoxy Floor Coatings, and the finish is also more durable. Our floor concrete coating finishes are also more slip-resistant and will not discolor like some Epoxy Floor Coatings.
Our flooring cures within a few hours, however our team of professionals recommends waiting at least 4-6 hours before walking on your brand new concrete coated flooring. After 12 hours, you can begin moving lightweight objects onto the flooring, like light patio furniture. We recommend waiting a full 24 hours before moving anything heavy back into the area where we’ve applied the coating (your car, heavy equipment or furniture etc.).
It sure won’t! Our concrete floor coverings will not yellow or discolor, because they are UV stable. This one of the many benefits of using Polyurea or Polyaspartic floor coatings.
If you follow our maintenance and cleaning guidelines, you should not have to worry about resealing the concrete floor coating. We offer a professional grade cleaner that will easily remove stains or tire marks, but will also preserve the life of your concrete coating topcoat.
We’ve perfected our 6-step application process, so most typical projects take between 5-10 hours depending on the square footage. We pride ourselves in a one-day application, and will do everything possible to stay within that time frame. Rainy weather can delay the project, but it is rare.
You can clean our concrete coatings with typical sweeping, mopping or steaming, and hoses. We offer maintenance services should your concrete flooring ever need cleaning, however you can also use non-abrasive cleaners, like CLR, to remove grease or other stains.
TAGG’s concrete coatings are oil resistant as well as moisture resistant.
Bayer Material Science first developed Polyaspartic coatings in the 1990’s to protect steel bridges and infrastructure from rusting and corrosion. It has since been modified for different applications, once being durable concrete flooring coatings.
Polyaspartic Concrete coating is another name for Aliphatic Polyurea, which is a hybrid material consisting of ester and other materials. It was originally developed to coat metal bridges. It was later used to coat concrete flooring due to its durability and moisture resistance. Polyurea is also used to coat truck bed liners.
They sure can! We offer wonderful solutions for driveways, patios, and even the area around the pool. Our coatings are all UV stable, which will help prevent discoloration or flaking.
Polyaspartic flooring coatings can be used in a variety of environments. The durability, slip resistant finish is fantastic for any industrial setting, storefronts, patios, or even driveways or garages.
We have perfected a six step process for applying Polyaspartic Floor Coatings that involves prepping the floor, basecoating, applying chips, scraping the chips, and applying the clear UV protective clear coat.
You can! Polyaspartic floor coatings are safe to apply in temperatures as cold as -40 degrees.
Our Polyaspartic Floor Coatings are engineered to rapidly cure, and can be dry in a matter of a few hours! However, we recommend waiting at least 5-6 hours before walking on newly applied coating and 24 hours before moving heavy objects back onto the flooring.
Installing Polyaspartic Floor Coating correctly is critical to the appearance and durability of your flooring. Hiring a professional is the best way to ensure that your flooring will look amazing and last a lifetime! Our team at TAGG Concrete Coatings is certified in Polyaspartic Floor Coating installation and have many years of experience.
It is! Polyaspartic floor coatings are specially formulated for their incredible adhesion properties. If you have existing patches of epoxy coating, our team can sand it down, vacuum, and wipe down the area with a solvent. Once prepped, we will apply your new, superior, Polyaspartic Floor Coating

Our clients are our most important asset.

This is what they say about us.

Where We serve
We service the Greater Des Moines And the Omaha Metropolitan area including:

Revival Concrete Coatings

EVERY job is done right and our customers are 100% Satisfied.

6950 NE 14th Street, Suite 31 Ankeny IA 5002